Welding Safety Tips

Welding can be a dangerous procedure if proper precautions are not taken. When workers are tasked with welding, for any application, safety should always be the number one priority. Welding requires adequate training and knowledge of safety standards.

Here are the 7 welding safety tips at the workplace to implement:

1. Provide The Manuals

Equipment comes with a manual, so it is essential for any welder operating the machine at the workplace to read the manual. It contains operating guides and information on how to maximize the machine’s output and safety measures. In the event the manual is lost or damaged, contact the manufacturer for another copy. Fortunately, many manufacturers are now providing manuals online for easy access.

2. Carry Out Safety Training

While reading a manual is essential, it is equally important to ensure all designated employees receive training on the machinery’s safe operations, including the supervisors.

Organizations like RCL Safety Centre also carry out programs that educate workers on hazards, precautions, the different types of welding, welding equipment, and the required PPE (personal protective equipment).

3. Provide the Right PPE

This includes gloves, boots, respirators, fire-resistant clothing, helmets, and ear protection to protect your employees from the welding hazards by providing them with the right PPE.

Ensure the welding helmets have side shields and the ideal shade of lens to protect the eyes and the face from arc flashes.

4. Proper Ventilation

The welding workplace must be well ventilated for the proper removal of airborne particles and gasses. Welding produces gases like nitrogen oxide, ozone, nickel oxides, carbon monoxide, and chromium, which are easy to penetrate the lungs when inhaled. Inhaling these can lead to severe health problems like cancer, irritation of the lungs and throat, pneumonia, and asthma.

OSHA provides clear guidelines on ventilation requirements, such as the space needed between welders in any working space. Depending on your company’s working area, one ventilation strategy might not work. In this case, use multiple methods to ensure there’s proper ventilation.

There are three main ventilation strategies:

  • Local Exhaust Ventilation (LEV) is the most effective ventilation strategy for removing gases and fumes from welding. This method involves removal or the exhaustion of the fumes, vapors, dust, and gases before they can mix with the air in the working space. Some examples of LEV include a moveable hood, fume extraction welding guns, and a downdraft bench.
  • Mechanical Dilution Ventilation – this uses roof exhaust fans and wall fans, or other mechanical strategies to keep airborne pollutants from entering the welding workspace.
  • Natural Dilution Ventilation – it is the least effective strategy and involves the addition of fresh air into a working space through mechanical or non-mechanical methods.
5. No Flammable Materials in the Workspace

Sparks, molten splatters, and heat will cause fires if they land on a flammable material. The workspace must have non-flammable materials, including the walls and other partitions. If the walls, roof, ceiling, or partitions are combustible, provide workers with fire-resistant shields.

These shields can also be used to cover any flammable content within the workspace that you cannot move when welding, especially when working in confined areas with limited spaces. However, the work area must not have any clutter, regardless of how limited space you may have.

6. Adopt Boom-Mounted Feeders for Wires

Part of reducing clutter includes reducing the number of wire cables lying around the workplace. A simple trip can be hazardous, and boom-mounted wire feeders can help reduce this hazard.

Boom-mounted feeders will also save workers the time and energy needed to lift and move around with some of the welding equipment, which can be heavy. A boom moves up and down to about 60-degrees and rotates up to 360-degrees.

7. Fire Extinguishers and First-Aid Kits

Due to the high fire risks that come with welding, the workspace must have fire extinguishing and protection equipment strategically placed. The workplace must also have first aid kits available and easily accessible.

It is also essential to have all workers trained on using fire extinguishing equipment and steps to take if there is a fire, including performing first aid.

You can get more training from RCL Safety Centre thru https: www.safetycentre.ng/training_register

At RCL Safety Centre this training is also available in different Nigerian languages like PIDGIN,YORUBA,HAUSA AND IGBO

Our company (RCL Safety Centre) is an indigenous company dedicated to Health, Safety and Environment Training and Services.

We are technical partners of the National Industrial Safety Council of Nigeria (NISCN) as well as approved training partners of most major International Occupational Safety and Health organizations like NEBOSH, and corporate members of ISPON (Institute of Safety Professionals of Nigeria) with thousands of personnel trained in various areas till date.

For more information visit our website: www.safetycentre.ng

Email: sale@safetycentre.ng or mma@safetycentre.ng

Contact us on: 08099700070, 09057666623 or 08164363532

Leave a Comment

Your email address will not be published. Required fields are marked *